Statewide Bitumen is proud to be the only Australian owned and operated company that can offer you every bitumen option form base preparation to DESIGNER COLOURED BITUMEN SURFACES  and surfaces that meet the requirements for heritage listed properties.

WE CAN ASSIST YOU WITH:

• Sub base excavation and preparation

• Road base placement and compaction

• Bitumen Primes, Primerseals

• Emulsion Seals, hot and cold

• 2 Coat Sprayseals with C170 Bitumen, C320 Bitumen, PMB Bitumen Seals

• Asphalt laying: AC10, AC7, DG10 Ect

• Bitumen Slurry Seals

• Asphalt Sealcoating

• Asphalt Hot Rubber Crack repairs

• Road Sawing

Statewide BItumen Brisbane is the only company in Australia that can offer you a coloured bitumen sprayseal that can be made to look like a natural gravel path that will never wash away.
This surface is widely used in heritage listed properties, bush walkways cycle tracks and private driveways. SEAL-O-FLEX 205 really is a special product.

The unique system pioneered by Ron Vanderhoff from Bushmates Coloured Bitumen is labour intensive and incorporates many custom built machines never seen before. The results are hard to explain, perfectly imperfect, perfectly natural.

To understand the cost comparisons from standard bitumen to SEAL-O-FLEX 205 here is a summary for the coloured bitumen sprayseal process.

• SEAL-O-FLEX 205 is imported from Holland in 205L drums, mainly because coloured jobs are small and the product cant be reheated to often so small storage is required.

• Drums are loaded one at a time into custom built drum decanter (melter) that will hold 3000 Litres when full. One full load from cold to mixing temperature will usually take 24 hrs.

• The product is then pumped into a storage / circulating tank 1200L at a time.

• A small quantity of SEAL-O-FLEX 205 is then pumped into a high speed mixer where about 2 percent natural rock pigment is added and mixed for 15 minutes to form a concentrated batch of coloured bitumen. This is then sucked back into the circulation tank and circulated for 1 hour.

• Finally the finished product is ready to be pumped into our Road Sprayers which must to be completely clean of black bitumen or it will contaminate the colour and turn it grey.
  1 litre of black bitumen will ruin 2000 L of colour ).  SEAL-O-FLEX 205 is also 5 times the cost of standard bitumen before we mix the colour in so contaminiation is a big issue.

• Once the road sprayer is full or has the correct quantity required the remainder of the coloured bitumen is put back into 205 L drums and stored for later use or transport.

• Pre mixed drums can than be sent to remote locations but must still accompany a decanter for re melting.

• Base preparation / Primerseal / 10mm black bitumen seal and then the SEAL-O-FLEX 205 is applied at between 190 and 205 degrees C and covered with matching 5-7 mm aggregate. The surface is then rolled extensively to minimise loose aggregate on completion.

We have tried to simply the process in an effort to reduce cost to the customer but at present we have been unable to improve the process.

It may be more expensive than standard bitumen but it will last twice as long and looks 10 times as good.

SEAL-O-FLEX 205 coloured gold and applied at 205 Degrees C

STATEWIDE BITUMEN & ASPHALT service the following areas and many more regional centres:

• Brisbane - Gold Coast & Sunshine Coast
• Townsville - Makay - Rockahampton - Bundaberg
• Sydney & Blue Mountians & Woolongong
• Newcastle & The Hunter Valley
• Perth - Karratha - Brome - Kununurra - Kalgoorlie
• Darwin - Catherine & Alice Springs
• Adelaide - Port Perie - Renmark & Port Augusta

Statewide Bitumen crews operate Hino 2 in 1 Bitumen Spray-Seal Trucks which have given us a unique advantage over conventional spraying and allows us to operater with smaller crews, with less overheads and have eliminated all of the hazardous components of conventional bitumen spraying.     Chipping forward is the safest way to spray !

Statewide Bitumen have extensive experience in constructing carparks, roads and driveways and each crew supervisor hold a Certificate 3 in Road Construction & Bitumous Surfacing

Our workforce can provide Hot and Cold Bitumen Spraying,  Asphalt Laying, Asphalt Seal-Coating, Hot Rubber Crack Sealing and STATEWIDE BITUMEN are the only company in Australia that can supply coloured bitumen sprayseal mixed to any colour you require using SEAL-O-FLEX 205.   Red Bitumen, Gold Bitumen, Brown Bitumen and High VIsibility Bitumen colours are no problem at all.

	Local Government – Public, Sporting and Community Areas, Roadwork, Void Seals & Emulsion Seals, Road Shoulder Seals
	Rural Community - Rural Driveways, Residential Driveways & Bush Roads Decorative Gravel Driveways, Heritage Styled Bitumen
	Entertainment Venues – Car-parks, Clubs and Pedestrian Areas, Nature Walkways, Golf Courses Tracks
	Hospitality – Resorts, Hotels and Public Areas
	Industry and Mining – Roads and Support Carriageways, Profilling & Deep lift asphalt work, Dust Seals
	Construction – Domestic and Commercial excavation and drainage